Thistle sailboat

Harken

Mainsheet cleat

- 4-hole mounting base, stand-up spring, double-hole shackle, H150 cleat on swiveling arm, add you own block

H144

$152.60

base & cleat with mounting screws

H144FA

$153.40

base & cleat with #10 mounting bolts and under-cap t-nuts (requires cap replacement)

H144FB

$157.80

Cam cleat

- heavy-duty, aluminum jaws

cleat only

H150

$36.35

cleat with large eyestrap (H137) and fasteners to screw to wood (spinnaker halyard cleat)

H150FA

$39.60

cleat with large flairlead (H425) and fasteners to screw to wood, specify flairlead color

H150FC

$43.60

cleat with 3/4" teak riser and #10 bolt and nut (spin guy cleating on rail)

H150FD

$41.05

Cam cleat

- medium duty, plastic jaws

cleat only

H365

$28.65

cleat with fasteners to screw to wood

H365FB

$29.15

cleat with flairlead, 3/4" teak wedge and #10 bolt and nut (traveler control on trunk cap)

H365FE

$41.15

Cam cleat

- micro carbo-cam

cleat only

H423

$22.45

cleat with micro flairlead and fasteners (cleats on 45� braces), specify fairlead color

H423-1

$28.90

Large pivoting exit block

- with H150 cleat

H140

$112.80

Small pivoting exit block

- with H423 cleat

H291

$87.65

Ronstan

Cam cleat

- c-cleat, carbon-fiber, medium

RF5010

$29.45

Cam cleat

- t-cleat reinforced, medium

RF5011

$28.95

Cam cleat

- t-cleat reinforced, small

RF5001

$24.95

Jibsheet cleating

Jibmaster

- track-mounted, custom sliding car. Except as noted, includes fixed block and Harken 150 cleat with pillared fairlead assembly. Price is per pair

Jibmaster III, complete assembly. Turning block is a Harken ratchet

GE453

$332.00

Jibmaster III, car and ratchet block only. Add your own cleat

GX453

$242.90

Jibmaster II, complete assmbly. Turning block is a Harken carbo cheek

GE452

$269.40

Jibmaster II, car and carbo block only. Add your own cleat

GE456

$120.00

Jibmaster II or III. Car only

GB453

$85.00

Jibsheet track & related

1" T- track. 5 1/2" long with fasteners, pair

GX452P

$35.00

ash jib bars with 1/4" bolts and wing nuts. Needed on older D&M fg hulls to get proper fore-and-aft jibsheet lead position

GE457

$40.00

ash jib bars as above with 5 1/2" track mounted

GX457-1

$84.50

360 cleats

Cleat bracket rotates around central shaft that guides line from below. Mounting bracket screws to cb trunk side. Allows cleating from either side. Used for vang, cb controls

360 plus

- the standard for many years. Cleat is Harken 365. Includes mounting screws

with flairlead and cleat. Specify flairlead color (R, Blue, BL, Y, G)

GF360

$94.00

without cleat or flairlead

GB360

$60.00

360 mini

- much lower and smaller. Ball-bearing turning block. Cleat is Harken 423. Includes mounting screws. Save your shins

with flairlead and cleat. Specify flairlead color (R, Blue, BL, Y, G)

GF363

$86.50

without cleat or flairlead

GX363

$48.50

Accessories

Micro cam flairlead

- fits H471, H423. Specify color (R, Blue, BL, Y, G)

H424

$6.05

Cam flairlead

- fits H150, H365. Specify color (R, Blue, BL, Y, G)

H425

$6.90

Reversible cam fairlead kit

- fits H150, H365. Provides much wider cleating angle

H328

$12.15

Reversible micro cam fairlead kit

- fits H423. Limited supply

H329

$10.60

Micro cam wire fairlead

- fits H423. Limited supply

H284

$5.50

20� wood wedge, teak

- used to angle H150, H365 for traveler controls

GE361

$4.50

Flat 3/4 in wood riser, teak

- used on rail to raise H150 for spinnaker sheeting

GE311

$3.50

Under-rail traveler - wood bracket, pair

- mounting for cleat and cheek block, lines feed from transom

GE328

$40.00

CLEATS

Harken

Ronstan

Jibsheet cleating

360 cleats Cleat bracket rotates around central shaft that guides line from below. Mounting bracket screws to cb trunk side. Allows cleating from either side. Used for vang, cb controls

Accessories

360 cleats

Cleat bracket rotates around central shaft that guides line from below. Mounting bracket screws to cb trunk side. Allows cleating from either side. Used for vang, cb controls