Thistle sailboat

Halyards

Main halyard, GMW standard

- exits side of mast and clips to fixed hook on side of mast. Two swaged balls near splice

GE140

$83.50

Main halyard, gold mast

- exits side of mast and clips to fixed hook on mast above gooseneck. Two swaged balls near splice. Requires drilling of mast

GX140

$81.25

Jib halyard, cleats on trunk

- clips to sliding hook on side of centerboard trunk. One swaged ball near splice. Can be used on any mast

GE158

$76.25

Jib halyard, cleats on fwd grating

- secures with a cam cleat located on forward grating cap aft of mast

GX158

$75.25

Spinnaker halyard

- 5/32" prestretch

GB140

$24.50

Pre-cut line

Mainsheet

- length is for a standard 3:1 system

3/8"

GB420

$45.00

9 mm Mafioli Swiftcord

GB420-1

$94.05

Jibsheet

endless, 3/8in

GB421

$26.95

endless, 9 mm Mafioli Swiftcord

GB421-1

$60.65

double-ended, 3/8 "

GB422

$28.75

Spinnaker sheets

endless, 1/4"

GB315

$34.85

endless, 3/16", for light air

GX315

$21.85

endless, 6 mm Mafioli Swiftcord, low stretch

GB315-1

$68.25

endless, 4 mm Mafioli Swiftcord, for light air

GB315-2

$37.75

1/4", double-ended, pair

GB316

$38.00

CB control line

- 1/4"line, used for CB drum take-up and trunk-mounted cleat

GB350

$15.40

Vang line

- 1/4" line, connects boom to stanchions and multiple-purchase vang block

XB344

$7.35

Cunningham control line

- 3/16", for 45� brace-mounted double-ended control

GB371

$4.47

Topping lift

- 5/32" pre-stretch, hangs from block on mast, your hook at one end, block at the other

GB381

$7.60

Topping lift control

- 3/16", for 45� brace mounted double-ended control

GB382

$5.67

Traveler control lines

- 1/4", trunk cap mounted, pair

XB320

$11.35

Vang control line

- 1/4", for 8:1 block-and-tackle system

XB345

$9.45

Miscellaneous

Lifting bridle assembly

- 3/8" dacron. With 2 stainless S-hooks for attachment to forward grating and D-shackle for aft attachment. Grating hardware is included, aft hardware is not

GF820

$52.25

bridle only

GF821

$45.40

Topping lift hangar assembly

- 3/32" wire supports Harken block from middle spreader

GF123

$29.20

wire only

GE123

$5.00

Shock cord

- tensions the topping lift hook when not in use

GB380

$3.10

Stays

1/8" 1 x 19 stainless steel wire, with swaged forks at top

Forestay

- top is swage fork, bottom isturnbuckle. Attaches to fixed tang or pigtail above rail

GE161

$78.50

Pigtails

- connects forestay lever to above-rail forestay. Supplied with built-in stainless bushed fairlead. Eye at bottom is 1/4" - top: 3/16" swage eye, bottom:1/4" swage eye. Stainless-bushed fairlead mounts to bow plate Eye at top is 3/16"

short, for GMW and Clark hulls

GE400

$32.00

long, for D&M hulls with brass bow plate (rectangular holes)

GE404

$36.35

long, for D&M fg hulls with stainless bow plate

GE405

$44.45

Shrouds

- price is per pair, all have swage forks at top

GMW standard, bottom iss wage fork. Attaches to chainplate on seat

GE170

$129.00

D&M standard. Longer than GMW. Bottom is swage fork. Attaches to chainplate on seat

GE171

$129.00

Microadjust shroud assembly

- GMW microadjust shrouds, Staymasters, connecting pins. Allow very fine rake and rig-tension adjustment.

GE176

$227.90

GMW, D&M microadjust shrouds. Use with Staymasters

GE172A

$128.00

StayMaster shroud adjuster, pair

GC014

$93.90

GMW multi-adjust. Use with multi-hole shroud extender. Bottom iseye

GE172

$120.00

D&M multi-adjust. Use with multi-hole shroud extender. Bottom iseye

GE173

$120.00

LINE & WIRE

Halyards

Pre-cut line

Miscellaneous

Stays 1/8" 1 x 19 stainless steel wire, with swaged forks at top

Stays

1/8" 1 x 19 stainless steel wire, with swaged forks at top