Thistle sailboat

Fasteners

Outwale screws

-10 x 2 1/2 flat head Phillips, lot of 100

GB725

$30.00

Closed-end aluminum pop rivets

use to install inspection ports, attachment of boom end castings

GB722

$0.30

Aluminum washer

use inside tank as pop-rivet backer when installing inspection ports

GB723

$0.05

Mast tools

Spreader socket installation tools

- large-diameter steel ball (anvil) and steel punch to start flaring of socket

GC140

$20.50

Tension gauge - Loos

- use to measure tension of diamonds or standing rigging

standard

GB860

$89.16

professional model

GB861

$127.57

Miscellaneous

3/8 counterbore

- attaches to 13/64" drill bit (not included). Cuts hole for wood plugs

GB710

$6.25

5200 sealant

- use to seal keel-strip screws. Silicone does NOT work

GB771

$14.47

Cradle bunkers - lateral hull support members, cut from 2 x 8's. One fits the hull at the end of the seats, the other fits at the stanchions. Use on sawhorses or to build a cradle

GE702

$20.00

templates for cradle bunkers. Cut your own

GG700

$3.00

Long drill bit

- drills hole for long 10 x 2 1/2" outwale screws (normal length drill bit is too short)

GB712

$4.25

Plug cutter

- cuts 3/8" wood plugs, requires drill press

GB711

$11.75

Plugs (bungs)

- 3/8" wood plugs to cover fastener heads or to plug old fastener holes, bag of 100

ash

GB582

$8.00

mahogany, Phillipine (red)

GB581

$8.00

mahogany, Honduras/ South American (tan)

GB583

$8.00

teak

GB680

$8.00

templates for cradle bunkers. Cut your own

GG700

$3.00

Varnish - Captain's Z-Spar

- conventional marine spar varnish. Provides good UV protection

GB750

$42.46

Pins

Mainsail tack pin

- 1/2" , fits forward boom casting

GB185

$3.85

Clevis pins

- headed stainless pins. Secures with ring-ding or cotter pin

3/16" pin

1/2" long - attaches stays to mast

GB150

$1.00

11/16" long - fits Harken shackles

GB340

$0.85

15/16" long - fits Harken Dinghy blocks

GB341

$0.90

1/4" pin - for outhaul sheave, forestay lever

RF266

$4.45

Quick-release pin

- 3/16", solid hardened-stainless pin with ball detent at one end. Caution - the hollow, center-push quick pins will break under shroud loads

medium lenght, attaches shroud to chain plate on seat

GB005

$4.25

short length, attaches shroud to shroud extender or Staymaster

GB013

$3.95

Ring-ding

- wire rings for easy attachment to clevis pins

small

GB155

$0.25

medium

GB156

$0.17

SUPPLIES & TOOLS

Fasteners

Mast tools

Miscellaneous

Pins